上海駿精賽主動化無限公司 
|
Cycle speed maximum (with good CN mold) |
Forming adn cutting production cycle of up to 30 cycles/min. Single forming production cycle of up to 35 cycles/min. |
|
配置正常運轉大帶寬(在利用展覽思想道德好的注塑模具的條件下) |
擠壓成型沖切要能達到30期限每鐘頭,單脫模電動車續航35生長期一分鐘的時間 |
|
Dry cycle speed |
50 cycles/min |
|
空機轉運周期時間 |
50期限每20分鐘 |
|
|
760x580mm |
|
大真空成型范圍 |
|
|
Forming area minimum |
375x350mm |
|
小熔融占地面 |
|
|
Closing force (Forming/Cutting station) |
250KN/500KN |
|
關閉力(真空成型/沖切站) |
|
|
Height of formed part above or below film level |
150mm |
|
真空成型生成物高，正面/負向 |
|
|
Forming station Top / Bottom table movement |
170mm |
|
定型站穩/下級任務臺挪動 |
|
|
Film thickness range (depending on film properties) 膜料 |
0.2-1.8mm |
|
料厚數量（決定于于膜料本質特征） |
1 Integrated forming, punching, stacking, and waste winding station, sheet stock treatment is more smooth, and energy consumption is less.
集合的壓合、沖切、偏移、固體廢物收卷功位，片料正確處理更通暢，沖力耗損更低。
2 Forming and cutting station use firm cast iron structure, matched with roller bearing's crankshaft to guarantee perfect forming, cutting.
真空機頭及裁截站用平穩的塑料規劃，搭載滾柱軸承套的曲臂后勤保障真空機頭,裁截。
3 Forming station with independent servo-plug drive on upper table, gives you more flexible to adjust the process, gets the best products.
擠壓成型推上工作任務臺自力系列伺服無刷電機驅動包的幫住收縮頭。才可以讓您更矯捷的調濟生產出來工藝設計，換取好思想道德的結果。
首要合用于PS、HIPS、PVC、PET、PP等塑料片材成型，出產各類盒、碟、托盤、碗、蓋等包裝成品。如：食物盒、蛋糕盒、快餐盒、糕點托盤、超市托盤、醫藥針劑托盤、口服液托盤.等
